Official Series Description


Lab Data Summary

Aggregate lab data for the PITS AND DUMPS soil series. This aggregation is based on all pedons with a current taxon name of PITS AND DUMPS, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to PITS AND DUMPS were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.


Water Balance

Monthly water balance estimated using a leaky-bucket style model for the PITS AND DUMPS soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

There are insufficient data to create the water balance bar figure.



There are insufficient data to create the water balance line figure.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the PITS AND DUMPS series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

There are insufficient data to create the sibling sketch figure.

Select annual climate data summaries for the PITS AND DUMPS series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the PITS AND DUMPS series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with PITS AND DUMPS share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

There are insufficient data to create the competing sketch figure.

Select annual climate data summaries for the PITS AND DUMPS series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the PITS AND DUMPS series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with PITS AND DUMPS, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

This figure is not available.

Block Diagrams

No block diagrams are available.

Map Units

Map units containing PITS AND DUMPS as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Pits and dumps173720460337hg0lca62019751:24000
Pits and dumpsPAsbc43513956151hv7vca67219661:20000
Pits and dumpsPA1939457633hc6cca67319741:24000
Pits and dumpsPxG918457755hcb9ca67419681:24000
Pits and dumps180450469971hs1cca69220011:24000
Pits and Dumps102348470207hs8zca70119841:24000
Pits and dumpsPt720640608phlsfl60919681:24000
Pits and Dumps, mine131713485954j9nyid67519921:24000
Pits and Dumps, mine65960415238fy2smi04319851:20000
Pits and dumpsPd889528253kqpftn14919741:15840
Pits and dumps66X142518021kd1cva01519781:15840
Pits and dumps, limestone53546518435kdgqva16519801:20000
Pits and Dumps66X1030985132y9qrva7901:12000
Pits and dumps2383283502364jvr9wy62519851:24000

Map of Series Extent

Approximate geographic distribution of the PITS AND DUMPS soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .